HYPERTURN 200 POWERMILL

Main spindle for turning and milling operations

Milling spindle for flexible turning, drilling and milling operations:

two versions of milling spindles available - either with high torque (6.500 rpm / 630 Nm) or high spindle speed (10.000 rpm / 340 Nm)

Up to 200 tool magazine positions

Additionally equipped with a 3-positions pick-up magazine for tools up to a length of 1000 mm

HIGHLIGHTS

HIGH-PERFORMANCE MAIN SPINDLE FOR HEAVY CUTTING

For turning and milling operations, equipped with 84 kW and 6400 Nm torque. Sealing air, working area coolant and programmable clamping pressure are standard features on the Hyperturn 200. One or more programmable NC steady rest can assist the processing.

THE TAILSTOCK IS 100% PROGRAMMABLE USING THE CONTROL

The tailstock is 100% programmable using the control. With the highquality and precisely-dimensioned MK6 quill, all operations can be supported or extended with the counter spindle thanks to the machine modular construction.

RAM SYSTEM IN BOX IN BOX STRUCTURE

Moving column. Is constructed like the EMCO MECOF machines with a „Box-in-Box“ RAM structure. Thus, optimum rigidity and stability are ensured and high accuracy machining is guaranteed. The B-axis is equipped with a torque motor and integrated into the Ram design.

HIGH-PERFORMANCE MAIN SPINDLE FOR HEAVY CUTTING

For turning and milling operations, equipped with 84 kW and 6400 Nm torque. Sealing air, working area coolant and programmable clamping pressure are standard features on the Hyperturn 200. One or more programmable NC steady rest can assist the processing.

THE TAILSTOCK IS 100% PROGRAMMABLE USING THE CONTROL

The tailstock is 100% programmable using the control. With the highquality and precisely-dimensioned MK6 quill, all operations can be supported or extended with the counter spindle thanks to the machine modular construction.

RAM SYSTEM IN BOX IN BOX STRUCTURE

Moving column. Is constructed like the EMCO MECOF machines with a „Box-in-Box“ RAM structure. Thus, optimum rigidity and stability are ensured and high accuracy machining is guaranteed. The B-axis is equipped with a torque motor and integrated into the Ram design.

HIGH-PERFORMANCE MAIN SPINDLE FOR HEAVY CUTTING

For turning and milling operations, equipped with 84 kW and 6400 Nm torque. Sealing air, working area coolant and programmable clamping pressure are standard features on the Hyperturn 200. One or more programmable NC steady rest can assist the processing.

HYPERTURN 200 POWERMILL

• Very large working space for the complete machining of large workpieces up to a turning diameter of 1000 mm with a maximum length of 6100 mm

OVERALL DIMENSIONS/WORK SPACE

Work Area

Installation plan

OPTIONS/ACCESSORIES

BAND FILTER SYSTEM WITH HIGH-PRESSURE COOLANT PUMPS

A coolant pressure of 25/40/60/80 bar can be set as necessary. This enables coolant-fed drilling and milling tools to be used to their best advantage.

EMCO TOOL BREAKAGE MONITORING SYSTEM

The tool status is monitored by evaluating the load on the various axis drive motors. Excessive loads point to wear or broken tools. Too low a load indicates a tool is missing.

SOFTWARE/CONTROL

SINUMERIK 840D SL FOR HYPERTURN 200 POWERMILL

Shopturn-Shopmill/machining cycles, Machining simulation, Tool management, EMCO Diagnostics, etc.

The Sinumerik 840D sl with Operate user interface is ergonomically located at EMCO on the left of the work area and can be swivelled approx. 120°.

ESPRIT HYPERTURN 200 (OPTIONAL)

The sensational CAM solution for turning and turning/milling. ESPRIT greatly simplifies the programming of complex machining processes and significantly reduces set-up times.

EMCO CPS PILOT (OPTIONAL FÜR HYPERTURN 200)

EMCO CPS PILOT is the virtual EMCO HYPERTURN on the PC. The operator works at an external programming station with an image of the machine in simulated operation. Therefore, NC programs can be planned, programmed, simulated and honed.